An integrated Re(I) photocatalyst and sensitizer that activates the formation of formic acid from reduction of CO2: Difference between revisions
About |
---|
No edit summary |
No edit summary |
||
Line 121: | Line 121: | ||
====Additives==== | ====Additives==== | ||
In this study, the experiments were done with the additives water ({{#moleculelink:|link=XLYOFNOQVPJJNP-UHFFFAOYSA-N|image=false|width=300|height=200}}) and phenol ({{#moleculelink:|link=ISWSIDIOOBJBQZ-UHFFFAOYSA-N|image=false|width=300|height=200}}). |
Revision as of 17:39, 23 January 2024
Abstract
Summary
A photochemical reduction of CO2 to formic acid was shown using the rhenium catalyst and sensitizer [Re(bpy)2(CO)2][OTf] in combination with the supplemental photosensitizer [Ru(bpy)3][PF6]. Turnover numbers (TONs) up to 2750 for formic acid were reached in dimethylacetamide. The experiments were conducted under visible-light irradiation (λ = 405 nm) with TEOA (see section SEDs below) as sacrificial electron donor.
Advances and special progress
A unprecedented rhenium complex was used as an integrated photosensitizer/catalyst to generate formic acid from CO2; other rhenium catalysts only allow for the formation of CO as the reduction product.
Additional remarks
The complex [Re(bpy)2(CO)2][OTf] can act both as a photocatalyst and sensitizer, but its performance is considerably enhanced by the addition of [Ru(bpy)3][PF6] as supplemental photosensitizer. The variation of the catalyst concentration also showed a drastic influence on the performance of the catalytic system.
Content of the published article in detail
The article contains results for the reduction of CO2 to formic acid under visible-light catalysis using a rhenium complex as a catalyst. The catalytic system performs best (referring to the TON of formic acid production) in dimethylacetamide.
Catalyst
Photosensitizer
Investigations
cat | cat conc [µM] | PS | PS conc [mM] | e-D | solvent A | . | . | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | 0.8 | 405 nm | 1.75 | 12.5 | |||||||||
2. | 0.8 | 405 nm | 2 | 15 | |||||||||
3. | 0.8 | 405 nm | 1.5 | 2.5 | |||||||||
4. | 0.8 | 405 nm | 10.3 | ||||||||||
5. | 0.8 | 0.8 | 405 nm | 1.5 | 52 | ||||||||
6. | 0.8 | 405 nm | 0.8 | 10.8 | |||||||||
7. | 0.8 | 0.8 | 405 nm | 2.8 | 66 | ||||||||
8. | 0.8 | 0.8 | 405 nm | ||||||||||
9. | 0.8 | 0.8 | 405 nm | 2.8 | 11.5 |
cat | cat conc [µM] | PS | PS conc [mM] | e-D | solvent A | . | . | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | 0.2 | 0.2 | 405 nm | 0 | 0 | ||||||||
2. | 0.2 | 0.2 | 405 nm | 1 | 12.5 | ||||||||
3. | 0.2 | 0.2 | 405 nm | 2.5 | 19.5 | ||||||||
4. | 0.2 | 0.2 | 405 nm | 4.5 | 50.5 | ||||||||
5. | 0.2 | 0.2 | 405 nm | 6 | 59.5 | ||||||||
6. | 0.2 | 0.2 | 405 nm | 8.5 | 69.25 |
cat | PS | e-D | solvent A | . | . | additives | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | water | 405 nm | 4.25 | 25 | ||||||||
2. | water | 405 nm | 5.75 | 25.75 | ||||||||
3. | phenol | 405 nm | 5.25 | 27 | ||||||||
4. | phenol | 405 nm | 5.75 | 19 | ||||||||
5. | water | 405 nm | 2 | 12.5 | ||||||||
6. | water | 405 nm | 2.75 | 14.5 | ||||||||
7. | phenol | 405 nm | 1 | 10.25 | ||||||||
8. | phenol | 405 nm | 16.25 | 11.25 | ||||||||
9. | water | 405 nm | 3.25 | 20.5 | ||||||||
10. | water | 405 nm | 3.5 | 24 | ||||||||
11. | phenol | 405 nm | 7.75 | 30 | ||||||||
12. | phenol | 405 nm | 9 | 34.75 |
Sacrificial electron donor
In this study, the experiments were done with the sacrificial electron donor TEOA (100507).
Additives
In this study, the experiments were done with the additives water (H2O) and phenol (PhOH).
Investigations
- Effect of proton donor (Molecular process, Photocatalytic CO2 conversion experiments)
- Solvent effect study between DMA DMF and acetonitrile (Molecular process, Photocatalytic CO2 conversion experiments)
- Study on the concentration of catalyst (Molecular process, Photocatalytic CO2 conversion experiments)
- Time profile in DMF (Molecular process, Photocatalytic CO2 conversion experiments)