An integrated Re(I) photocatalyst and sensitizer that activates the formation of formic acid from reduction of CO2: Difference between revisions
About |
---|
No edit summary |
m (added Publication category) |
||
Line 121: | Line 121: | ||
====Additives==== | ====Additives==== | ||
In this study, the experiments were done with the additives water ({{#moleculelink:|link=XLYOFNOQVPJJNP-UHFFFAOYSA-N|image=false|width=300|height=200}}) and phenol ({{#moleculelink:|link=ISWSIDIOOBJBQZ-UHFFFAOYSA-N|image=false|width=300|height=200}}). | In this study, the experiments were done with the additives water ({{#moleculelink:|link=XLYOFNOQVPJJNP-UHFFFAOYSA-N|image=false|width=300|height=200}}) and phenol ({{#moleculelink:|link=ISWSIDIOOBJBQZ-UHFFFAOYSA-N|image=false|width=300|height=200}}).[[Category:Publication]] |
Latest revision as of 10:37, 11 April 2024
Abstract[edit | edit source]
Summary[edit | edit source]
A photochemical reduction of CO2 to formic acid was shown using the rhenium catalyst and sensitizer [Re(bpy)2(CO)2][OTf] in combination with the supplemental photosensitizer [Ru(bpy)3][PF6]. Turnover numbers (TONs) up to 2750 for formic acid were reached in dimethylacetamide. The experiments were conducted under visible-light irradiation (λ = 405 nm) with TEOA (see section SEDs below) as sacrificial electron donor.
Advances and special progress[edit | edit source]
A unprecedented rhenium complex was used as an integrated photosensitizer/catalyst to generate formic acid from CO2; other rhenium catalysts only allow for the formation of CO as the reduction product.
Additional remarks[edit | edit source]
The complex [Re(bpy)2(CO)2][OTf] can act both as a photocatalyst and sensitizer, but its performance is considerably enhanced by the addition of [Ru(bpy)3][PF6] as supplemental photosensitizer. The variation of the catalyst concentration also showed a drastic influence on the performance of the catalytic system.
Content of the published article in detail[edit | edit source]
The article contains results for the reduction of CO2 to formic acid under visible-light catalysis using a rhenium complex as a catalyst. The catalytic system performs best (referring to the TON of formic acid production) in dimethylacetamide.
Catalyst[edit | edit source]
Photosensitizer[edit | edit source]
Investigations[edit | edit source]
cat | cat conc [µM] | PS | PS conc [mM] | e-D | solvent A | . | . | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | 0.8 | 405 nm | 1.75 | 12.5 | |||||||||
2. | 0.8 | 405 nm | 2 | 15 | |||||||||
3. | 0.8 | 405 nm | 1.5 | 2.5 | |||||||||
4. | 0.8 | 405 nm | 10.3 | ||||||||||
5. | 0.8 | 0.8 | 405 nm | 1.5 | 52 | ||||||||
6. | 0.8 | 405 nm | 0.8 | 10.8 | |||||||||
7. | 0.8 | 0.8 | 405 nm | 2.8 | 66 | ||||||||
8. | 0.8 | 0.8 | 405 nm | ||||||||||
9. | 0.8 | 0.8 | 405 nm | 2.8 | 11.5 |
cat | cat conc [µM] | PS | PS conc [mM] | e-D | solvent A | . | . | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | 0.2 | 0.2 | 405 nm | 0 | 0 | ||||||||
2. | 0.2 | 0.2 | 405 nm | 1 | 12.5 | ||||||||
3. | 0.2 | 0.2 | 405 nm | 2.5 | 19.5 | ||||||||
4. | 0.2 | 0.2 | 405 nm | 4.5 | 50.5 | ||||||||
5. | 0.2 | 0.2 | 405 nm | 6 | 59.5 | ||||||||
6. | 0.2 | 0.2 | 405 nm | 8.5 | 69.25 |
cat | cat conc [µM] | PS | PS conc [mM] | e-D | solvent A | . | . | λexc [nm] | . | TON H2 | TON HCOOH | . | . | . | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | 1 | 405 | 10.3 | |||||||||||||
2. | 1 | 1 | 405 | 1.5 | 52 | |||||||||||
3. | 0.5 | 1 | 405 | 15 | 115 | |||||||||||
4. | 0.2 | 1 | 405 | 24 | 275 | |||||||||||
5. | 0.1 | 1 | 405 | 38 | 428 | |||||||||||
6. | 0.05 | 1 | 405 | 50 | 535 | |||||||||||
7. | 0.02 | 1 | 405 | 225 | 1480 | |||||||||||
8. | 0.01 | 1 | 405 | 375 | 2750 |
cat | PS | e-D | solvent A | . | . | additives | λexc [nm] | . | TON H2 | TON HCOOH | . | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | water | 405 nm | 4.25 | 25 | ||||||||
2. | water | 405 nm | 5.75 | 25.75 | ||||||||
3. | phenol | 405 nm | 5.25 | 27 | ||||||||
4. | phenol | 405 nm | 5.75 | 19 | ||||||||
5. | water | 405 nm | 2 | 12.5 | ||||||||
6. | water | 405 nm | 2.75 | 14.5 | ||||||||
7. | phenol | 405 nm | 1 | 10.25 | ||||||||
8. | phenol | 405 nm | 16.25 | 11.25 | ||||||||
9. | water | 405 nm | 3.25 | 20.5 | ||||||||
10. | water | 405 nm | 3.5 | 24 | ||||||||
11. | phenol | 405 nm | 7.75 | 30 | ||||||||
12. | phenol | 405 nm | 9 | 34.75 |
Sacrificial electron donor[edit | edit source]
In this study, the experiments were done with the sacrificial electron donor TEOA (100507).
Additives[edit | edit source]
In this study, the experiments were done with the additives water (H2O) and phenol (PhOH).
Investigations
- Effect of proton donor (Molecular process, Photocatalytic CO2 conversion experiments)
- Solvent effect study between DMA DMF and acetonitrile (Molecular process, Photocatalytic CO2 conversion experiments)
- Study on the concentration of catalyst (Molecular process, Photocatalytic CO2 conversion experiments)
- Time profile in DMF (Molecular process, Photocatalytic CO2 conversion experiments)